Ok, here's the dimensions (from the outside edge of the bricks):
The main portion of Mickey's head is 8 ft across.
The ears are 5 feet 2 inches across.
I did not figure these out from pictures or anything, I just layed the bricks down in what looked like the correct sizes.
The distance from the center of the head to the center of the ears is approx 64 inces. From center of one ear to center of the other ear is 96 inches.
The flag pole was the center, and everything was based on that. I tied a little string to the pole and dragged it around in a circle using a can of spray paint to mark the edge of the head. I pounded some PVC tubing into the ground temporarily at the center location of the ears to use the string/circle markings.
We removed all grass from in between the circles. I located what appeared to be the lowest portion of the lawn and dug down about 3 inches on the outside edges of the Mickey where the bricks would be layed. I laid down approx 2 inches of compacted limestone paver base as a bed for the bricks. Once all the bricks were leveled and laid, we filled with dirt.
Supplies:
123 bricks (8 inch wide 'honey' color)
11-12 bags of paver base
about 40 cubic feet of dirt
And almost a ton of Elbow Grease
DW planted mostly annuals, but there were some perennial bushes/flowering plants. We'll fill in with mulch in a few weeks after the plants have had a chance to grow a bit.
I also ran an underground electrical connection for a spot light on the flag and maybe some ground lighting sometime in the future.
Questions?
If you plan ahead, you can have ALL of this delivered. I didn't and had to cart it all myself.
