Photo Sharing: Pentax

I've been happy with Flickr. Uploading and Posting are really easy.
 
Does it make a difference if you keep continuous shoot on or off with a Pentax K-X? I had it turned off but don't know if there was a good reason for it.
 
Continous is useful when you want to try to capture something moving quicker and you want to try to capture that exact moment if you know what I mean, you just hold the shutter button until its over. Othre than that I dont use it...
 

So, do you keep it enabled? Hi or Lo

Also, an autofocus quesion - do you generally keep it on AF-A or do you switch often between AF-C or AF-S? I can never seem to remember where in the menus to find things. I have to keep carrying the manual!
 
So, do you keep it enabled? Hi or Lo

Also, an autofocus quesion - do you generally keep it on AF-A or do you switch often between AF-C or AF-S? I can never seem to remember where in the menus to find things. I have to keep carrying the manual!

For normal everyday shooting, I keep my K10's and K5 on single frame shooting, AFS(auto focus single). When I'm shooting moving objects or panning (such as when I shoot at the oval race track) I may switch to continuous mode with AFC (auto focus continuous). At the drag strip, when I'm trying to get a stop action shot I may go to continuous mode with AFS. These are just available options that can be customized for individual situations. My K10's only have single or continuous mode, but the K5 has an additional continuous mode of hi/low. I have yet to use the low continuous mode.
 
Here she is, my new K5! and sadly probabaly the last photo I will take with my beloved Kx...

IMGP4031.jpg
 
Congratulations!! Even though the K5 was a major upgrade for me, the K10D holds a major soft spot in my heart. I always keep one 'on the ready' to shoot! I think you will really like the K5 starting with the dual wheels, which allows for quicker on-the-fly changes. Coming from the Kx/Kr you should find that once you get used to the controls you will wonder how you ever did without! Because I struggle with keeping the horizon level, the onboard level has been a godsend. You already had better usable high ISO with your Kx/Kr than the K10D and I think you will find the K5 that much better. IMHO, the K5 with the stainless steel frame, titanium body, weather sealing, the 16.2 Sony sensor, an improved AF system is still the best APS-C camera on the market. With Ricoh now supporting and using the Pentax name for all its cameras, everything is starting to look very rosy for the system! They have a new lens roadmap (not to mention that all older lenses still are usable on the new bodies plus with onboard IS (SR) each one is stabilized) that looks to be impressive. Have fun with the new camera!:thumbsup2:thumbsup2
 
Quick question for all you Pentaxians out there.

I have a K-7, when I use my Pentax 50-200 I get good AF throughout the spectrum. When I use my Tamron 18-200, the focus out at 200 is not as clear. I know that the K-7 has an AF adjustment. I am going to do this for just the Tamron lens. My question is....Has anyone ever done an AF adjustment? It does not look that difficult and if it goes bad I can re-set it but I am still curious if anyone has done it before.

Thanks.
 
Quick question for all you Pentaxians out there.

I have a K-7, when I use my Pentax 50-200 I get good AF throughout the spectrum. When I use my Tamron 18-200, the focus out at 200 is not as clear. I know that the K-7 has an AF adjustment. I am going to do this for just the Tamron lens. My question is....Has anyone ever done an AF adjustment? It does not look that difficult and if it goes bad I can re-set it but I am still curious if anyone has done it before.

Thanks.

It really is not difficult. It may take just a little time. There are charts and everything you can use. I prefer real use/life focusing. The first thing is to determine if it is front focusing or rear. The focus point is what you are adjusting. If your lens is just not sharp at a particular focal length then the AF Fine Adjustment is something you may not want to do. I try to find something outside (aka good light) that will allow me to determine where my camera is focusing when the aperture is wide open. Once you determine the focus point it can be adjusted by going to the (C)ustom menu. On the K5 it is number 26. You can turn it on and then it gives you a choice of Apply All or Apply One. Since this is only happening on one lens, choose Apply One. You then can adjust the focus point more to the front or rear by adjusting along the grid line. Since I use my real life focusing, I will do this several times to ensure I get the focus point where I want it. If everything gets messed up, just select 'Reset' and your back to the default. You can't hurt it. Check your manual, its all there under AF Fine Adjustment. After each adjustment, I go to the computer to view the image to ensure the change or make a further adjustment. Once your done, the camera will use your adjustment whenever that particular lens is mounted.

Its not real hard.
 
It really is not difficult. It may take just a little time. There are charts and everything you can use. I prefer real use/life focusing. The first thing is to determine if it is front focusing or rear. The focus point is what you are adjusting. If your lens is just not sharp at a particular focal length then the AF Fine Adjustment is something you may not want to do. I try to find something outside (aka good light) that will allow me to determine where my camera is focusing when the aperture is wide open. Once you determine the focus point it can be adjusted by going to the (C)ustom menu. On the K5 it is number 26. You can turn it on and then it gives you a choice of Apply All or Apply One. Since this is only happening on one lens, choose Apply One. You then can adjust the focus point more to the front or rear by adjusting along the grid line. Since I use my real life focusing, I will do this several times to ensure I get the focus point where I want it. If everything gets messed up, just select 'Reset' and your back to the default. You can't hurt it. Check your manual, its all there under AF Fine Adjustment. After each adjustment, I go to the computer to view the image to ensure the change or make a further adjustment. Once your done, the camera will use your adjustment whenever that particular lens is mounted.

Its not real hard.

Thanks Papa, I was going to do it inside by taping a newspaper to the wall but I like your idea of going outside better. Will try it this weekend.
 
Today, I visited the Congressional Cemetery in DC for a Civil War Tour. I was hoping to find some cherry blossoms still on the trees and was pleasantly surprised to find this. I don't have access to my photoshop programs nor a calibrated monitor and since this is an unprocessed JPEG, I'm hoping it looks okay. It was beautiful in-person.


IMGP5779 by Gianna'sPapa, on Flickr
 
Nice shot! I will be passing through Savannah in 10 days and was hoping to still find some trees in bloom myself...
Heres a photo I took last month, I'm posting it because today is a POTC kinda day here...

IMGP0810_1_3-1.jpg
 
We attended the Robert Ballard event at the National Geographic in
Washington D.C. They had a Titanic exhibit that included many of the sets/items from the movie. They also had this model. I thought it ironic that this image had, in addition to the model, two reflections and there were three Olympic class ships, Olympic, Titanic and Brittanic.


IMGP6417 by Gianna'sPapa, on Flickr
 
:thumbsup2 :yay: i'm a NEW pentaxian; not had my camera at disneyworld yet, will be practicing between now and august.... and watching this thread intently!!!:surfweb:
 












Receive up to $1,000 in Onboard Credit and a Gift Basket!
That’s right — when you book your Disney Cruise with Dreams Unlimited Travel, you’ll receive incredible shipboard credits to spend during your vacation!
CLICK HERE


New Posts





DIS Facebook DIS youtube DIS Instagram DIS Pinterest DIS Tiktok DIS Twitter DIS Bluesky

Back
Top Bottom