Vellum Disney Quotes?

[vanreg]

Does anyone know if vellum disney quotes are available anywhere?

 

[MazdaUK]

I haven't seen any (not that THAT means anything over here ) but there are loads of free fonts to download so you could make your own - one page of vellum would give you a good few at a very reasonable price

 

[Lisa]

I agree with Mazda, I would make my own on vellum paper and my printer. Good luck if you try it.

 

[Faerie]

If you print on vellum, set your printer to "transparency" so they'll dry

 

[calanniebu]

One word of advice: There is different types of vellum for different printers. Make sure you get the stuff that will work in the type of printer you have. :-D HTH

 

[MazdaUK]

Money-saving tip: all those bits you trim off so standard sheets fit in your printer - keep them, then print a rough copy on paper and adhere your strips over with a tiny bit of tape runner (you cant do blocks with this of course but its great for titles) then run it through your printer set to transparency and best quality

 

[calanniebu]

Money-saving tip: all those bits you trim off so standard sheets fit in your printer - keep them, then print a rough copy on paper and adhere your strips over with a tiny bit of tape runner (you cant do blocks with this of course but its great for titles) then run it through your printer set to transparency and best quality

I never would have thought of that!!! Thanks for sharing! I have a ton (well two bins full) of scraps! What a great way to reuse them.

 

[BernardandMissBianca]

Money-saving tip: all those bits you trim off so standard sheets fit in your printer - keep them, then print a rough copy on paper and adhere your strips over with a tiny bit of tape runner (you cant do blocks with this of course but its great for titles) then run it through your printer set to transparency and best quality

I do that too, even with cardstock! I'm such a cheapskate. LOL

 

[ilovedale3]

Try Keller's Creations .

I bought some from them at the last Scrapbook Expo in Atlanta.

 

[MaryJ]

One word of advice: There is different types of vellum for different printers. Make sure you get the stuff that will work in the type of printer you have. :-D HTH

How can you find out what will work in your printer and what won't?

 

[Faerie]

I bought the value pack at Mike's and it works just fine as long as I use the transpancey setting

 

[calanniebu]

I've purchased my vellum at a local for me store called Paper Source. They had two types of vellum - one for laser printers and one for inkjets. Sometimes it was just trial and error.

 

[MazdaUK]

I use the CM plain stuff and it works OK, but I do find it has a "right" and "wrong" side and if you get it wrong the printing bleeds