BernardandMissBianca
Rum makes math fun!
- Joined
- Feb 18, 2005
- Messages
- 23,882
Today's class is slide mounts.
Supplies
slide mounts 2x2 inch square. They come as 2 pieces attached, for this class I have separated them
paper
trimmer
adhesive (preferably wet)
exacto knife
step one:
cut paper to 2 1/2 x 2 1/2 inches square
step 2:
attach paper to slide mount, centering slide mount in middle of paper. I use Scotch quick dry tacky adhesive.
Step 3:
when glue is dry, cut an X in the window of slide mount. Use a ruler as a guide. Also trim outside corners at an angle.
step 4:
fold over inside and outside edges and glue. Use small binder clips to hold closed until dry.
step 5:
trim excess paper from inside folds.
decorate!
Supplies
slide mounts 2x2 inch square. They come as 2 pieces attached, for this class I have separated them


paper
trimmer
adhesive (preferably wet)
exacto knife
step one:
cut paper to 2 1/2 x 2 1/2 inches square

step 2:
attach paper to slide mount, centering slide mount in middle of paper. I use Scotch quick dry tacky adhesive.


Step 3:
when glue is dry, cut an X in the window of slide mount. Use a ruler as a guide. Also trim outside corners at an angle.


step 4:
fold over inside and outside edges and glue. Use small binder clips to hold closed until dry.


step 5:
trim excess paper from inside folds.

decorate!