OK - here is the lo-down on the korker bows...
You will need...
1. a long skinny wooden dowel...the thinner the dowel, the tighter the curled ribbon
2. narrow (3/16th inch, I think) GROS GRAIN ribbon. It MUST be gros grain. (up to 3 colors/patterns)
3. embroidery floss - any color
4. alligator clips or a barette
5. hot glue gun
6. clothespins
Do this:
1. Wrap the ribbon around the dowels, don't overlap. Secure at each end with clothespin
2. Bake at 275 degrees for about 20 minutes
3. allow to cool
4. Remove curled ribbon, cut ribbon into segments of 4-6 curls
5. arrange your pattern (black-red-black-red, etc.)
6. thread the needle with floss (3 strands)
7. begin loading your needle with the curled ribbon by poking it through the middle of each ribbon, keeping them in your pattern
8. after all ribbon is loaded, puch all ribbon to the bottom of thread where the knot is
9. arrnage ribbons so it loos nice. tie a knot on top.
10. put some hot glue on bottom of korker, glue to clip
11. use the needle and thread to further secure the korker to the clip, going through the clip and piercing random bottom pieces of ribbon.
There you have it!! SOOO easy!!! Let me know if you have any questions!!!