***Cruise magnets and graphics links part 3!!!***

[milliepie]

Millipie:

Seems like I've seen ones like this before, but not sure. Hope you can do something with this one. This is based on the deck chair like the one you have above.

On the left have "Kevin" in a green chair and "Holli" in the purple daisy duck chair. In the middle, have "Ken" in the Donald Duck chair. On the right, put "Chloe" in the pink polka dot chair and "Jake" in the Mickey Mouse chair. We're sailing on the Wonder on April 1 if you want to put that on there.

I hope you can do this and it's not too much to ask, but will understand if you can't.

Thank you.

Here it is.

 

[traceyjayne]

Here you go. Close to how you envisioned it?

These look like they may work for my keyrings perhaps?
But different text !!
I tried to print off that DCL button that i think was Millliepies but it says DCL button at the bottom when I print off a sheet of 35
But when I do a sheet of larger ones the title is not there grrrrrrr!!

It is the smaller ones that I need as the bigger size is too big!
The size of the key ring that I have is 35mm x 45mm

Help!!

Tracey
DISNEY MAGIC MED CRUISE

 

[joius24]

i tried a trial print and they came out fine. I just made sure in the settings it printed at original size. good luck

Thanks Jordak...these are great and so are you!

 

[tripodjw]

You bet, glad to.

Thanks so much!

 

[son3disfan]

Just wanted to post that we had SOOOO many compliments on our magnets this cruise. Our rooms were just off the elevators (our doors could be seen in the foyer) and sometimes we would catch people standing at our doors reading them! -there were four doors with magnets- (and they all managed to make their way home!No one stole them this cruise!)

Thanks again to eveyone who made these beautiful magnets for my friends and myself!

I'll post a pic of our door when I get a chance!
I think it is just awesome that you share your talents with other cruisers!

 

[milliepie]

These look like they may work for my keyrings perhaps?
But different text !!
I tried to print off that DCL button that i think was Millliepies but it says DCL button at the bottom when I print off a sheet of 35
But when I do a sheet of larger ones the title is not there grrrrrrr!!

It is the smaller ones that I need as the bigger size is too big!
The size of the key ring that I have is 35mm x 45mm

Help!!

Tracey
DISNEY MAGIC MED CRUISE

Here Tracey, try this one I used photobucket. See if that works. I also made you a bookmark, I'll send it to you in the pm you sent. I got your other requests too and I'll get to them soon.

 

[ruadisneyfan2]

Just wanted to post that we had SOOOO many compliments on our magnets this cruise. Our rooms were just off the elevators (our doors could be seen in the foyer) and sometimes we would catch people standing at our doors reading them! -there were four doors with magnets- (and they all managed to make their way home!No one stole them this cruise!)

Thanks again to eveyone who made these beautiful magnets for my friends and myself!

I'll post a pic of our door when I get a chance!
I think it is just awesome that you share your talents with other cruisers!

We had a similar location on our Oct cruise too and often saw people looking at our door. The last night when I was taking them down, people passing by said, 'Oh no, we won't get to look at your door any more!' I was touched.



We love being near the elevator lobbies. It's supposed to be a less desirable area due to noise but in 3 cruises, we've never heard anyone and it's so convenient!

 

[disneyluvrs4]

Jordak

Can I please get the mickey looking thru the keyhole and the stitch looking thru the key hole (no dates, I just want them for my fridge? Thanks so much! Also, do you have the license plate that is in sand with the mickey head with Castaway Cay with 2010? I think all I saw when I looked thru your stuff was 2009? Did I miss it? Does that graphic just come in license plate or can it just be a regular magnet as well? If possible can I use it for part of my FE (so I'd need it blank-to maybe add names from the FE)? I really want something cool for my FE graphic to use as a magnet... I just don't want the same thing someone else might be giving out on the same cruise. Thanks in advance!

 

[jordak]

Jordak

Can I please get the mickey looking thru the keyhole and the stitch looking thru the key hole (no dates, I just want them for my fridge? Thanks so much! Also, do you have the license plate that is in sand with the mickey head with Castaway Cay with 2010? I think all I saw when I looked thru your stuff was 2009? Did I miss it? Does that graphic just come in license plate or can it just be a regular magnet as well? If possible can I use it for part of my FE (so I'd need it blank-to maybe add names from the FE)? I really want something cool for my FE graphic to use as a magnet... I just don't want the same thing someone else might be giving out on the same cruise. Thanks in advance!

When i made the 2010 castaway plate, i just made it to fit the plate. If i took the bevel and holes out could you use it. If you want it more square i could probably blend it into some sand.

 

[ksloane]

A few jordak requests, please!

blue Tinkerbell licence plate - Cameron, Texas, June
Jiminy Cricket License Plate - Becka, Texas, June
blue plate that has Mickey and Walt..it's called 70.jpg - Kimberly, Texas, June

Wonder Magazine - Not sure of wording, but something to the effect of Kimberly, Cameron, and Becka's 1st cruise, or Kimberly, Cameron, and Becka Celebrating Becka's Graduation - June 8, 2010...just use your own best judgement of what would fit and look "right."

Thanks so much!

 

[jordak]

A few jordak requests, please!

blue Tinkerbell licence plate - Cameron, Texas, June
Jiminy Cricket License Plate - Becka, Texas, June
blue plate that has Mickey and Walt..it's called 70.jpg - Kimberly, Texas, June

Wonder Magazine - Not sure of wording, but something to the effect of Kimberly, Cameron, and Becka's 1st cruise, or Kimberly, Cameron, and Becka Celebrating Becka's Graduation - June 8, 2010...just use your own best judgement of what would fit and look "right."

Thanks so much!

you're welcome

 

[china mom]

OK, I showed DH the magnet that you made and I printed and he went crazy for it. If I could bug you for a couple more...

This one with a boy and girl kid Mickeys playing. The Micky in the chair drinking a beer - an beer but Budweiser if you have it. Minnie can be drinking anything.

"the Parkers"
"Disney Wonder February 28, 2010"

Also If I could get a Happy Brithday magnet from anybody. It is for my little boy who turns 47 this vacation. I don't have a design picked out - surprise me.

Thanks a million.

Maria

 

[disneyluvrs4]

When i made the 2010 castaway plate, i just made it to fit the plate. If i took the bevel and holes out could you use it. If you want it more square i could probably blend it into some sand.

I'm thinking the way you have it now would probably work I could put the names above where it says castaway cay. Thanks.

Thanks for the keyholes too. I think they are so cute. I just love them!

 

[mishoe01]

I could never do what you guys are able to do.....THANK YOU so much for being willing to do these amazing DISigns for us



Can I request a few things??

Is there a way to do the Porthole License Plate w/ Tigger & Roo (or just Tigger) peaking out?? If so....can I get one with Monica on it?

Can I get the regular License Plates with:

Mickey & Minnie with Pam - North Carolina - DCL logo both spots for stickers

Tigger with Jackie - Arizona - DCL logo both sticker spots

Tigger & Roo (or Pooh & friends in circle) with Monica - Florida - DCL logo

Can I also get the one with the coffee cup - if possible with the DCL logo (if not, Mickey foam) with:
Chances are we're at the Cove on the napkin??

Thank you guys in advance!

 

[jordak]

OK, I showed DH the magnet that you made and I printed and he went crazy for it. If I could bug you for a couple more...



This one with a boy and girl kid Mickeys playing. The Micky in the chair drinking a beer - an beer but Budweiser if you have it. Minnie can be drinking anything.

"the Parkers"
"Disney Wonder February 28, 2010"

Also If I could get a Happy Brithday magnet from anybody. It is for my little boy who turns 47 this vacation. I don't have a design picked out - surprise me.

Thanks a million.

Maria

I have a made a couple birthday designs, but i don't think they will work for your son. I bet Milliepie or tjbaggott have something in their archives.

 

[jordak]

I could never do what you guys are able to do.....THANK YOU so much for being willing to do these amazing DISigns for us



Can I request a few things??

Is there a way to do the Porthole License Plate w/ Tigger & Roo (or just Tigger) peaking out?? If so....can I get one with Monica on it?

Can I get the regular License Plates with:

Mickey & Minnie with Pam - North Carolina - DCL logo both spots for stickers

Tigger with Jackie - Arizona - DCL logo both sticker spots

Tigger & Roo (or Pooh & friends in circle) with Monica - Florida - DCL logo

Can I also get the one with the coffee cup - if possible with the DCL logo (if not, Mickey foam) with:
Chances are we're at the Cove on the napkin??

Thank you guys in advance!

you're welcome

 

[mishoe01]

you're welcome

Amazing as normal....can I change the Pam one to have Mickey & Minnie please??

 

[jordak]

Amazing as normal....can I change the Pam one to have Mickey & Minnie please??

Right one?

 

[mishoe01]

Right one?

Wonderful!! THanks again!

 

[Magic Carpet]

Right one?

Jordak,

May I kindly request this one with Jamie & Steve?

Thank you