***Cruise magnets and graphics links part 3!!!***

[jordak]

Would you happen to have or could you make me a disign or my husband. He is retired from the Air Force I doubt you would have a B-52 disign, but he was a navigator on a B-52, but anything that would say USAF Retired would be great.

Anything you can do would be really appreciated.

Thanks so much,

Peg

ok, i probably went way overboard on what you were expecting and nothing about it is Disney themed but this is the only idea i had. Hopefully i have the plane and Pin correct. If not i apologize. Also i would have went with a last name on the tag but only knew the first. If you like the design and want to change it let me know. I totally understand if this wasn't what you had in mind. Won't be offended and it was a good way to kill a couple of hours.

 

[tinkerone]

Which version of mickey and minnie did you want? One with them holding hands and Mickey Bars or the one i with the black frame with info on top? Thanks

either is good. not sure which one i saw. think itsw the black frame one though. thanks soooo much.
sorry, this pretains to post 3332.

 

[PegIra]

Jordak,

Wow,

I couldn't have asked for more with the B-52 and Navigators wings, It is absolutely perfect. I can't thank you enough. I am thrilled.

Thanks again for your time and effort.

Peg

 

[tripodjw]

Hi Jordak
You’re doing fabulous work. Would you mind doing some disigns for me?
We’re on the Magic - 15-26 May 2010 to the Med.

(i) Mickey D2 (and holograph goofy) license plate in the name of “Heath” and a state/location of “Ospreylia”
(ii) Mickey/Goofy Men in Black License plate In the name of “Jane” – same state/location
(iii) Green Goofy License plate in the name of "tripodjw" and a state/location of “Disboards”
(iv) Magic – Steamboat Willie-Mickey magazine cover – Heath and Jane 6th Anniversary cruise 15-26 May 2010

Thank you in advance – you’re a star.

Jane/tripodjw

 

[jordak]

Hi Jordak
You’re doing fabulous work. Would you mind doing some disigns for me?
We’re on the Magic - 15-26 May 2010 to the Med.

(i) Mickey D2 (and holograph goofy) license plate in the name of “Heath” and a state/location of “Ospreylia”
(ii) Mickey/Goofy Men in Black License plate In the name of “Jane” – same state/location
(iii) Green Goofy License plate in the name of "tripodjw" and a state/location of “Disboards”
(iv) Magic – Steamboat Willie-Mickey magazine cover – Heath and Jane 6th Anniversary cruise 15-26 May 2010

Thank you in advance – you’re a star.

Jane/tripodjw

You bet, glad to.

 

[Mozart]

Millipie:

Seems like I've seen ones like this before, but not sure. Hope you can do something with this one. This is based on the deck chair like the one you have above.

On the left have "Kevin" in a green chair and "Holli" in the purple daisy duck chair. In the middle, have "Ken" in the Donald Duck chair. On the right, put "Chloe" in the pink polka dot chair and "Jake" in the Mickey Mouse chair. We're sailing on the Wonder on April 1 if you want to put that on there.

I hope you can do this and it's not too much to ask, but will understand if you can't.

Thank you.

 

[Luckymomoftwo]

Hi to all of you wonderful DISigners!!! I was wondering if anyone can provide me with one of those dining rotation tickets you get when you board the ship? Preferably for the Disney Wonder on a four night cruise. But if you happen to have a 3 night, that will work, too. It's just for a scrapbook I'm making in advance for my cruise!

THANKS!

 

[joius24]

HI Jordak!
I'd like to make some gifts... Can you make a few designs with the following criteria:
1. all graphics are in exactly 1 inch circles ( I have plans for them)
2. all have EBTA 2010 somewhere in the design (subtle is ok with this)
3. I would like if this is possible:
a couple Mickey designs
a couple Tink designs
a couple Ship designs
one dcl logo design

and anything else your creative mind can dream up

You can place all of the circles on one big page if feel like it....ssince they will only be a inch and maybe this is something that you do not do...I just figured I'd ask
thanks so much for all yor graphic endeavors and happy evening!

 

[jordak]

HI Jordak!
I'd like to make some gifts... Can you make a few designs with the following criteria:
1. all graphics are in exactly 1 inch circles ( I have plans for them)
2. all have EBTA 2010 somewhere in the design (subtle is ok with this)
3. I would like if this is possible:
a couple Mickey designs
a couple Tink designs
a couple Ship designs
one dcl logo design

and anything else your creative mind can dream up

You can place all of the circles on one big page if feel like it....ssince they will only be a inch and maybe this is something that you do not do...I just figured I'd ask
thanks so much for all yor graphic endeavors and happy evening!

I could do it, but have you considered using one of the life preserver designs millipie makes? Would have the characters plus add the text to the preserver. If i were to do it i would probably make it look like shiny buttons but at 1 inch your not going to be seeing much detail.

 

[dismommy2]

Thank you again for all your DISigns! Love them!!!

I have 2 requests...

1. tbaggot:
29apr005.jpg
If you could change the wording to: It's 5:00 somewhere. If not no biggee.
Disney Magic in the corner and the other corner the cruise emblem and March 6th, 2010. No ipod please. But with a glass of red wine. Grandma Deb written in the sand.

2. Jordak:
The Mickey Breakfast - One for Macy and one for Brinley
March 6-13th on the Magic...not sure if you need any other info.

Thanks!!

 

[jordak]

Thank you again for all your DISigns! Love them!!!

I have 2 requests...

1. tbaggot:
29apr005.jpg
If you could change the wording to: It's 5:00 somewhere. If not no biggee.
Disney Magic in the corner and the other corner the cruise emblem and March 6th, 2010. No ipod please. But with a glass of red wine. Grandma Deb written in the sand.

2. Jordak:
The Mickey Breakfast - One for Macy and one for Brinley
March 6-13th on the Magic...not sure if you need any other info.

Thanks!!

Here you go

 

[dismommy2]

Jordak - Thank you so much!! It is adorable!

 

[joius24]

I could do it, but have you considered using one of the life preserver designs millipie makes? Would have the characters plus add the text to the preserver. If i were to do it i would probably make it look like shiny buttons but at 1 inch your not going to be seeing much detail.

Thats why I was thinking of something more simple... just graphic and letters if you know what I mean...like a mickey head only and EBTA 2010 or the outline or shadow shape of Tink with the letters and not much else...they will be adhered to the object with epoxy which will slightly magnify the graphic. Does that make sense. The /graphic/circle cannot exceed 1 inch at all

What do you think ...still Milliepie?

 

[jordak]

Thats why I was thinking of something more simple... just graphic and letters if you know what I mean...like a mickey head only and EBTA 2010 or the outline or shadow shape of Tink with the letters and not much else...they will be adhered to the object with epoxy which will slightly magnify the graphic. Does that make sense. The /graphic/circle cannot exceed 1 inch at all

What do you think ...still Milliepie?

I think i can do it and shouldn't take long if that's all you want.

 

[jordak]

Thats why I was thinking of something more simple... just graphic and letters if you know what I mean...like a mickey head only and EBTA 2010 or the outline or shadow shape of Tink with the letters and not much else...they will be adhered to the object with epoxy which will slightly magnify the graphic. Does that make sense. The /graphic/circle cannot exceed 1 inch at all

What do you think ...still Milliepie?

Here you go. Close to how you envisioned it?

 

[joius24]

Here you go. Close to how you envisioned it?

Hi Jordak ...THANKS! Thats what I was thinking..... Question...how do I print them to be only one inch wide ..they are coming up as much bigger
thanks

 

[jordak]

Hi Jordak ...THANKS! Thats what I was thinking..... Question...how do I print them to be only one inch wide ..they are coming up as much bigger
thanks

Your printer might be stretching them. I made sure each one is one inch.

 

[jordak]

Hi Jordak ...THANKS! Thats what I was thinking..... Question...how do I print them to be only one inch wide ..they are coming up as much bigger
thanks

i tried a trial print and they came out fine. I just made sure in the settings it printed at original size. good luck

 

[milliepie]

Hoping to get a few things for our upcoming cruise - so excited...

Jordak can I get...
1. Disney Cruise Plate - First Cruise - Colorado
2. Anniversary Shadow Box - 10th Anniversary - Chris & Char - Disney Magic -February 27th - March 6th

Tjbaggot....
1. Pirate mickey and minne heads (#2335) Mickey - Chris; Minnie - Char

Milliepie -
1. Pirate picture (#3301) - Chris & Char - Disney Magic
2. Tip Envelope - Thank you for making our 10th Anniversary Magical - Chris & Char

Thank you all for your sharing your creativity with all of us!!!

Here are the ones from me.

 

[milliepie]

Hi
I'm am new to the boards also a first time cruiser. your designs are amazing. I was wondering if I can get one with the beach chairs on Castaway Cay With the Dream Ship. we will be cruising in 2011. names are

Daddy
Mommy
Bianca
Grandma
Grandpa

Thank you so much

You're welcome!