Advice needed on electrical shock

Sheree Bobbins

DIS Veteran
Joined
Sep 9, 2000
Messages
6,266
I have a lamp which I was adjusting the other day. The lamp was plugged in but not on. I touched the light bulb in it and got a continuous "zapping" sensation, in other words, an electrical shock. Does this mean the lamp should be thrown out?
 
No, there's a crossed wire, probably in the socket where the wires are screwed in.

Unplug the lamp. If you have to, turn off the circuit breaker. Check the lamp cord. Do you have a pet or child that could have chewed on the cord and crossed the wires?

Check the plug itself to see what condition it's in.

But, usually, the problem is in the socket wiring. You can screw off the socket from the base. On some of them, you can simply pull off the socket sleeve. Check the wires at the screws. If one looks frayed, loose and is poking out and touch other metal, instead of being tucked directly under the screw, take a screw driver and push it back under the screw.

If you don't see any frayed wiring, the socket may simply need replacing. That's pretty easy to do also. It's only $2 for a new socket at Home Depot. You can even change to a 3-way light bulb socket if you wish. Directions are on line some where to install the new socket. Takes all of 5 minutes. Google for them. :goodvibes
 








Receive up to $1,000 in Onboard Credit and a Gift Basket!
That’s right — when you book your Disney Cruise with Dreams Unlimited Travel, you’ll receive incredible shipboard credits to spend during your vacation!
CLICK HERE








DIS Facebook DIS youtube DIS Instagram DIS Pinterest DIS Tiktok DIS Twitter DIS Bluesky

Back
Top Bottom