How to "override" thermostat at OKW

[postesf]

Does anyone knwo how to override the thermostat in the newly renovated units at OKW?

Thanks!!!
Stacie

 

[HWKI2]

I will bump this because we will be staying there this summer. Thanks

 

[Micca]

Dis-er Kent posted this in 09-I haven't tried it.

Press the power button and the down arrow button simultaneously. The letters "bp" should appear in the display indicating you are in "bypass" mode. Then you can use the up/down buttons to set the temperature. You may have to do this every 24 hours or every few days.

The sensor by-pass for our kind of thermostat was simple--I just pressed the "off" button and both the temperature "up/down" buttons all at the same time. "BP' appears in the thermostat, and then it operates as most other themostats in most other hotels in the US

And yet another:

The thermostat has two buttons on the left (ON/OFF and AUTO/FAN) and two buttons on the right (UP and DOWN)

1) Press the ON/OFF and AUTO/FAN buttons together. The digital display will change to 'CA'.

2) Press the ON/OFF and DOWN button together. The digital display will change to 'OR" (or something similar).

You have just deactivated the motion sensor. This will last for three days at which point you will have to repeat the process.


TO CHANGE AC THERMOSTAT SETTINGS THE THERMOSTAT HAS TO BE PUT INTO "SERVICE MODE" IT IS SIMPLE TO DO BY PRESSING THE FOLLOWING KEYS ON THE FRONT OF THE THERMOSTAT.

EXECUTE THE FOLLOWING SEQUENCE:

1. PRESS (AND KEEP PRESSED) THE F/C KEY

2. PRESS (AND RELEASE) THE OFF/AUTO KEY

3. PRESS (AND RELEASE) THE DISPLAY KEY.

4. RELEASE THE F/C KEY.

UPON SUCCESSFULLY COMPLETING THIS SEQUENCE, THE LCD WILL DISPLAY PAR (PARAMETER) AND THE PARAMETER NUMBER.

1. PRESS THE UP ARROW KEY AND SCROLL UNTIL # 6 APPEARS. (NEW MODELS # 24)

2. PRESS THE OFF/AUTO KEY

3. THE CURRENT LOW TEMPERATURE IS DISPLAYED.

4. PRESS THE DOWN ARROW KEY AND SCROLL UNTIL THE DESIRED ROOM
TEMPERATURE APPEARS
5. PRESS THE F/C KEY

I had this in my list of subscriptions...hope it's still current information.

 

[postesf]

Thanks! I hear the new thermostats are a pain so I want to be prepared just in case.

If anyone has used these since the new thermostats have been installed, I'd love to hear which one worked.

Thanks!

We leave next Friday...I can hardly wait!!!

Stacie