Someone Please Help....

[MickeyMinnieMelanie]

I have 2 shirts that have disigns that have 1/2 way peeled off. I have some of the disign peeled off the rest of the way so that I can reuse the shirt. Is there anyway to get the rest of it peeled off? I am at a point where I can't get the rest off and I don't want to throw the shirt away. I would rather reuse it for my next disign. ANY help appreciated.

 

[noahdove]

I don't know of anyway to remove the rest, sorry about that, but, maybe someone else has had this happen and know of a way to remove the rest..Good luck

 

[MickeyMinnieMelanie]

Anyone out there have any ideas?

 

[M_I_C_K_E_Y]

Sadly, I do not think that there is really a way to remove a transfer after it has been adhered. What would probably happen is that you would not get it fully off, the new transfer would not stick as well (because of residue or an uneven shirt surface) and the new transfer would not look as good or last as long. Your best bet is to start over on a new shirt.

 

[RustManFan]

I haven't tried it but there are many sites I see via Google that give instructions. Basically you put a plain piece of paper bigger than the image down and turn the shirt inside out. You iron on the inside and the transfer should peel off....

http://wiki.answers.com/Q/How_do_you_remove_an_iron-on_T-shirt_transfer_for_the_T-shirt

 

[MickeyMinnieMelanie]

I haven't tried it but there are many sites I see via Google that give instructions. Basically you put a plain piece of paper bigger than the image down and turn the shirt inside out. You iron on the inside and the transfer should peel off....

http://wiki.answers.com/Q/How_do_you_remove_an_iron-on_T-shirt_transfer_for_the_T-shirt

Thank you. Never thought of googling it. Goes to show how computer savvy I am

 

[MickeyMinnieMelanie]

And just to be clear... These are pre-Amy transfers.