Revised again:
***IMPORTANT NOTE*** For Longer titles, please TRY to choose a font that is NOT WIDE. The Mickey Font Cricut Cartridge is a wider font for example. Width is a tough one, because the fewer letters are in a word, the wider we can go. Make your individual letters with the assumption that the longer completed words would expand across a 2 page layout. Sometimes you end up with words on both the top and the bottom of a layout. Take the word "Frontierland" for example. That is 12 letters, in order to fit across a two-page layout, the letters need to be a smaller width than 2” (24”/12 letters minus a little so there can be a gap between letters when they are laid out). But with the words "Magic Kingdom", you could theoretically put “Magic” at the top of a layout, and "Kingdom" at the bottom, so you can go wider with your letters. Just be mindful of how the word will fit on a page. Basically, this means that not everyone can use a wide font like the Mickey font, with a large single word. Keep in mind also that we may need to overlap letters slightly for titles with even longer words like "Adventureland" (13 letters) so embellish them accordingly. Shorter words like "Africa" for example are not an issue--it's just the longer single words that get tricky. If you are unclear on this or have questions, please ask me.
Is this better? I appreciate all your help ladies!
I also added links to past swaps with photo examples of the completed titles made using 2 inch letters and also photo examples of the 4 inch letters.