Transfer Designs peeling

[CarolinaMomOf3boys]

i was going through my tshirts showing them to someone and noticed one corner starting to peel completely off
DO i just iron it again???

 

[mickeyfan1226]

I have gone over some before. Don't know if that is the right thing to do or not but it worked. I just redid it like I was doing it for the first time.

 

[CarolinaMomOf3boys]

Thanks, i will do that. I am wondering if i shouldnt pack our iron for the trip, 'just in case' ?

 

[heartbeeps]

i was going through my tshirts showing them to someone and noticed one corner starting to peel completely off
DO i just iron it again???

probably means that you didn't iron long enough to begin with. (BTW, I noticed that the HP dark take a longer ironing time than the HP light transfers.) Of course, you'll need to protect the design before using that hot iron. And, make sure the iron is hot enough!

 

[CarolinaMomOf3boys]

Thanks for the info, i am going to try to work on it today!

probably means that you didn't iron long enough to begin with. (BTW, I noticed that the HP dark take a longer ironing time than the HP light transfers.) Of course, you'll need to protect the design before using that hot iron. And, make sure the iron is hot enough!

 

[heartbeeps]

good luck! I had success with re-ironing the edge on a shirt that started to peel at the corner. Hopefully you'll have good luck too!

sending pixie dust your way to help with the good luck!