Question about bagging pages:
Do we need to individually bag pages in 2 gallon bags or do I put all 4 in one bag and then you seperate them? Im wondering if Im going thru too many bags? I dont mind doing indi', just curious!
No individual bagging. Just write your name and DISname on the back, so we know whose is whose, when we use them. Normally, we put all the bags for each group in one 2-gallon bag, so if you were in 2 page groups you would have 2 bags. However, since there are so few page groups, if all your pages fit for both groups would fit in one bag, you can just use one and I will separate everything.
I have a stupid question....
Ok so I was reading through the element list and I'm a bit confused and you think I've done enough of these swaps that I would know this stuff by now.
So if I made 1 Large Box and 2 small boxes would that fulfill my Obligation?
Or do I need to do more?
My element lists are slightly different than the rest of the hostesses, so it's always a good idea to read and re-read the lists as you are working on the swap. After reading comments made by scrappers made in the "using swap items" challenge, and seeing the pages people are making, lots of people like smaller boxes for photos, or large boxes for journaling. So I didn't think the old designations of "photo mat" and "journal box" quite worked anymore. And if a photo mat or large box was big enough for a 4x6, and you cut it in half that would be 3x4, so that is how I decided on the ratio of 1 lg box = 2 small boxes = .5 element.
So 1 lg box + 2 sm box = 1 element, and you would still need another element to get to 2 for this swap. Either one thing from the top half, or 2 things from the bottom.
And for another group I was gonna do a Lisence plate is that 1 element or 1 of 2 to do? Like would I need to do a lisence plate and a topper? Or do I still need to do more? Like a Plate a large box and 2 small boxes?
Sorry I want to go at this full bore this week and I need to know what I need to do.
Thanks
License plates are one element, so you would need something else from the top list, or 2 things from the bottom list.
And yes, everyone CHECK-IN. I was thinking I had the check-in set for the 1st of the month, but instead it was a first day of a week. So I will just change it to May 1st.
I am a little concerned that our thread doesn't have as many updates/prototypes as some of the other swaps. I hope that means that people have been quietly working along. I know M_M and Tigger1221 are busy with finals, and will be hard at work in May. But just another reminder, I will have these on their way back before I leave for WDW in mid-June. I have a couple more prototypes of my own to post later.
If you made any extras Im first in line for trading! Stickles?! And I just want you to know that I collect WDC pieces and Small World are my faves! I am kicking myself for not being in every group!!
Anyway, once it comes back, I'm going to have to reload all my extra software back on it, so I'm hoping that I don't have a problem with the cds going back on it. I guess if I have a big problem with it... now would be the time to get SCAL!!!
