I hope I didn't just make a mistake! UPDATE: I didn't!

bettymae1121

DIS Veteran
Joined
Jan 5, 2010
Messages
2,694
I just bought a $375 washing machine sight-unseen! :scared:

Our top loader broke with no hope of repair (paid $75 for it 4 years ago, can't really complain!). So I went online last night to do some research and found good reviews and independant studies on a GE front-loader model.

Sears had a floor model on sale, $375 when it's normally $700, so I jumped on it.

DH is going to the mall tomorrow with the truck to pick it up. I hope I like it as much as the people that review it!
 
Did you remember to at least measure the space to make sure you have the right clearance for it?

I have a friend who bought one for her laundry space last year or so and it never even made it off the truck...the delivery guy took one look at the spot it had to go and told her it wouldn't fit. It stuck out almost four inches more than her top loader, and meant the door to her laundry area wouldn't be able to close.
 
Sears had a nice scratch and dent store in Florida my aunt liked to shop at. Those are always fun to go to, perfectly good items on a discount. Plus you generally only see the front of the washer to begin with. It's not like it's sitting in the middle of the room for all sides to seen. Plus most people don't go into your home to stare at your washer, as long as you can deal with a knick or a dent here and there. Most the time, there's nothing wrong with them other than they've been taken out of the crate.
 
Did you remember to at least measure the space to make sure you have the right clearance for it?

I have a friend who bought one for her laundry space last year or so and it never even made it off the truck...the delivery guy took one look at the spot it had to go and told her it wouldn't fit. It stuck out almost four inches more than her top loader, and meant the door to her laundry area wouldn't be able to close.

:) No worries there, our basement is unfinished so anything can fit! That's a good thought though, thanks for suggesting it.

Sears had a nice scratch and dent store in Florida my aunt liked to shop at. Those are always fun to go to, perfectly good items on a discount. Plus you generally only see the front of the washer to begin with. It's not like it's sitting in the middle of the room for all sides to seen. Plus most people don't go into your home to stare at your washer, as long as you can deal with a knick or a dent here and there. Most the time, there's nothing wrong with them other than they've been taken out of the crate.

Funny you should mention that, it IS in the middle of the floor! I said, the basement is unfinished and where the washer is set up, you actually CAN see it from all sides (including the back, yeah it's a odd hook up but it works!). I hope it's not too dinged up from being on the sales floor though, but no one besids DH and I go into the basment so it really doesn't matter as long as it functions right.
 

At $375 for a front loader, I'd say you got a great deal, even without seeing the unit. There's some energy/water/detergent savings to be had over the top-loader anyway. I don't think you made a mistake.

A few years back I bought a front loader, from Best Buy, during an appliance sale, previous year's model, and the floor model... discount on top of discount on top of discount. The best way to do it :)
 
Good news is...you bought it at Sears. If there is a problem, they will take it back and refund your money. They are very good about standing behind the appliances they sell.
 
I :love: the Sears outlet. When I bought the washer we have now I had to take it back 3 times before I got one that worked with what we had. (space/electrical) Then 2yrs ago the regular Sears store had a basic top loader on sale for $199 on blackfriday. So now I have an extra washer in the box when this one dies. I bought it because I had the money then.
 
I would have probably jumped on it too! Being a national retail chain like Sears, I imagine if something about it didn't work, or you didn't want it, you can return it. Sounds like you got a great deal.
 
UPDATE:

We got the new machine home on Saturday and DH hooked it up yesterday. So far, so good! It works GREAT! I can't believe how little water it uses, even with just the two of us in the household I expect to see our water bill go down, that's how big the difference is. Our old washer did a great job with the spin cycle getting clothes really dry, but this one is even better, so our already short drying times have gotten even shorter, and the things I hang-dry also should take less time.

As for the condition of the outside of the machine (remember, it was a floor model so that's why we got it at 50% off) it isn't too bad. It does have some obvious scratches but nothing horendous, at 50% off I expected a lot more cosmetic damage.

As long as the machine holds up, I think we got a fantastic deal! After tax the regular price would have been almost $800, and we paid $400 with tax...with no delivery or instalation charges since we were able to pick it up and install it on our own. Yay us! :yay:
 
Remember this about detergent

http://www10.epinions.com/content_3687096452


The Bottom Line Cleaner clothes with less detergent and water usage makes a Front Loading Washing machine a wise choice.

About a year ago I moved into a dwelling that came equipped with a Kenmore Elite HE3t front-loading washing machine. I had previously used older front-loaders at a Laundromat, but had no experience with an "HE" type machine. One of the great advantages of these machines is that they use far less water per load. They are also gentler on clothes, and get them much cleaner than conventional top-loading washing machines.

Being a creature of habit, I proceeded to add a capful of my favorite liquid detergent to the soap dispenser tray. Next I pushed the "normal" wash button, held the "start" button for a few seconds, and was informed by the digital display that my load of laundry would be done in 45 minutes.

Lies! Nearly three hours later, my load finally finished. During the time, I noticed that the digital display was showing the letters "SUD." Finding the operating manual for said machine; I finally located a reference to this message. I quoth: "To avoid excessive sudsing, reduce detergent amounts or use HE detergents."

Another article in this forum exposes the HE Detergent Scam, and the author makes many excellent points, which I suggest you, read before using a HE front-loader.

I have found a few little tricks that works quite well, and do not require you to switch to HE detergent OR reduce the amount of detergent you would normally use. Simply add an equal amount of liquid fabric softener to your detergent.
Fabric softener virtually eliminates suds from occurring.


A fellow I sat next to one day on a commercial flight related another trick to me. It turned out he was a laundry detergent salesman who called on hotels and other large institutions. He said that the effectiveness of any detergent increases by 50% when the wash water is increased in temperature by 15 degrees Fahrenheit. So by simply feeding your wash with hot water, 120 degrees as opposed to 60 degrees, for instance, you'll get a 237% increased effectiveness of your detergent (in other words the detergent will work 337.5% of the capacity that it would if you use cold water.) Therefore, you can decrease the amount of detergent that you use by 70%. Add an equal amount of fabric softener and sudsing will no longer be a problem.

By the way, I live in Hawaii, where "cold" water is about 57 degrees, and usually closer to 70 degrees. For people in harsher climates, especially during cold winter months, water temperature may be substantially colder, so the difference between using hot and cold water may allow you to reduce the detergent used even more. Also, I keep my water heater set at the lowest possible temperature, but your water heater may well generate 140-degree hot water.


One last point, by reducing the sudsing problem, the wash cycle comes closer to the 45 minutes suggested by the digital display. I have yet to see this machine ever finish a load in less than 55 or 60 minutes, however! One day I'll run an experiment and was a load of clothes without any detergent, and see if the load is completed in 45 minutes.

Other interesting points... if you wash three loads of laundry per week in a HE frontloader as opposed to a standard top-loading machine, you will save about 15 gallons of water per load. That amounts to 45 gallons per week, 2,340 gallons per year, and if you estimate the life of the machine to be 10 years minimum, a total of 23,400 gallons of water.

If you always wash in hot or warm water, you will make a substantial savings in water heating costs.
 














Save Up to 30% on Rooms at Walt Disney World!

Save up to 30% on rooms at select Disney Resorts Collection hotels when you stay 5 consecutive nights or longer in late summer and early fall. Plus, enjoy other savings for shorter stays.This offer is valid for stays most nights from August 1 to October 11, 2025.
CLICK HERE







New Posts







DIS Facebook DIS youtube DIS Instagram DIS Pinterest

Back
Top