First Ever DISUnplugged Podcast Cruise Ten, Seriously Ten?!? You People Talk Too Much

[tickledtink33]

Kim, I thought John said they were working on a 4 night cruise.
Can anyone confirm that this is what he said?

I recall that is what John said also.

Thanks

We should know the date soon.

 

[winotracy]

I missed this part.... But it makes me happy!!! Unless the gift is an invoice for all the extra time and frustration we have caused her the past 16 months....



Glad you found your tax stuff. And I hear you about the credit card....



So my aforementioned outfit plan is out?



Translated into layman's speech....We are all being booked in steerage.



And the deposit is either $100 or $200?



RoboTA...AskTracy model...does not require sleep.



You may think you're a lurker, but we know who you are! And OH MY GOODNESS! Thank you so much for helping up hit a milestone!



I bet something will be started as soon as we find out the sail date. Sorry AskTracy.

Deposit would be $100 or $200 for the 4 night sailing (if DCL is still doing 50% off it will be $100).

So the brunch thing....any guesses on times? (Sorry I am impatient Tracy)

Stop being impatient! I need to get that set with DCL today.

 

[chirurgeon]

Don't count your chickens just yet.....

After I posted that, my mind started whirling. If it is only a 4 day and I don't do any pre or post cruise things, I might be able to swing it. Now I just have to start looking for a 2nd job to make sure I can pay for it after i spend 10 days at WDW in April. There goes those couple extra days at AKL concierge.

Kim

 

[calypso*a*go-go]

Uh oh -- looks like Todd is headed for trouble again...

 

[calypso*a*go-go]

Hey Tracy, we went and picked up our wine for the trip!!

One problem...how are you going to hand-carry that on the ship?

 

[DVCsince02]

Hey Tracy, we went and picked up our wine for the trip!!

I see your bung hole.....

 

[Marla Hellwig]

don't think that will fit through DCL's scanners

my cruise documents are coming - they are out for delivery

my FE gifts are also instate

have a great day everyone

 

[jeanigor]

I don't have a flattie because i'm not creative enought to build one.
Again if somebody else wants to make a flattie extra so i can carry it around then i would love to do that.

Question:
Can you laminate all kinds of shapes??
Where can you get something laminated (at Staples i understand but where else)?
How does it works??
and what is the pricing??

Tia for the help

There are a couple ways of laminating.
One way is "Hot Laminating". You place your object between two pieces of special plastic and run it through a heat machine. The plastic melts and binds together creating a rigid water tight, usually glossy coating.

Another way is "Cold laminating". You place your object between to pieces of plastic that have an adhesive on one side and it is rolled through a set of rollers. (Think of a pasta rolling machine.) This method usually produces a more flexible matte finish on your project.

 

[kab407]

After I posted that, my mind started whirling. If it is only a 4 day and I don't do any pre or post cruise things, I might be able to swing it. Now I just have to start looking for a 2nd job to make sure I can pay for it after i spend 10 days at WDW in April. There goes those couple extra days at AKL concierge.

Kim

Come on Kim...you know you want to go

Is there such a thing as, "Drunk Booking"?

 

[Yvet]

There are a couple ways of laminating.
One way is "Hot Laminating". You place your object between two pieces of special plastic and run it through a heat machine. The plastic melts and binds together creating a rigid water tight, usually glossy coating.

Another way is "Cold laminating". You place your object between to pieces of plastic that have an adhesive on one side and it is rolled through a set of rollers. (Think of a pasta rolling machine.) This method usually produces a more flexible matte finish on your project.

What i want and need is to laminate my logo's and all the stuff i made for putting on the stateroom door.
After it is laminated i put some magnet behind it so it sticks at the door.

Here i can only laminate in squares so then i have a lot of plastic around the logo's.

What would you suggest for what i want??

 

[georgemoe]

So the brunch thing....any guesses on times? (Sorry I am impatient Tracy)

It's no wonder you top the bad list.

Hi Todd.

 

[georgemoe]

I see your bung hole.....

She said bung hole.

 

[k5jm]

One problem...how are you going to hand-carry that on the ship?

Sea-Turtles Mate.....Sea Turtles.

 

[kimisabella]

What i want and need is to laminate my logo's and all the stuff i made for putting on the stateroom door.
After it is laminated i put some magnet behind it so it sticks at the door.

Here i can only laminate in squares so then i have a lot of plastic around the logo's.

What would you suggest for what i want??

Yvette - I've only laminated with the hot machine at Staples and you can then cut away any extra plastic around the design - the guy said to leave about 1/8" of plastic around the design when you cut it so the plastic doesn't seperate.

 

[jeanigor]

A. - I don't know any of those Twilight people.

2. - Shelly, did you make all of our flatties?

I. You will, Jamie. You will.

b. All your flatties? Are you bringing your own flotilla of flatties?

Uh oh -- looks like Todd is headed for trouble again...

What's new??? Unlike Nicole, I like to live on the wild side.

What i want and need is to laminate my logo's and all the stuff i made for putting on the stateroom door.
After it is laminated i put some magnet behind it so it sticks at the door.

Here i can only laminate in squares so then i have a lot of plastic around the logo's.

What would you suggest for what i want??

As long as it wouldn't damage the logo (photo paper or what not) I would suggest a heat laminate. If it is a good high heat and put through properly, trimming the extra plastic off shouldn't break the laminate seal.

 

[Dodie]

What i want and need is to laminate my logo's and all the stuff i made for putting on the stateroom door.
After it is laminated i put some magnet behind it so it sticks at the door.

Here i can only laminate in squares so then i have a lot of plastic around the logo's.

What would you suggest for what i want??

Here too - but then you just trim around those items, leaving a little of the sealed lamination on the edges (1/8 inch or so) to ensure it stays "stuck."

 

[MrandMissVacation]

For us Twilighters - new cast of New Moon has been announced!!!



http://movies.yahoo.com/photos/celebrities/gallery/1651/meet-the-cast-of-new-moon/fp#photo0

OH MY! I can't wait. I'm re-reading New Moon right now.

Back me up on the Alicia.....


We don't care how it fits. Does it look good?

Purty shoes sometimes come at a comfort cost!

Shoes? Did someone mention shoes?

My sister asked me yesterday.. "how many shoes are you packing for your trip" My answer was complicated.

(look I multiquoted, hoping it gets me PALO on sea day ray

 

[maiziezoe]

What a day! At school today someone pulled the fire alarm during lunch. Whole school had to evacuate and the fire department came as well as the police. Rumor has it that it was a 1st grader or kindergartner. Ends up it was a sweet, little girl who never gets in trouble. We know her dad well and only knew it was her when her dad walked into the principal's office.

Just let me say that we all have bad days. But, I can guarantee that it doesn't compare to the evening this young lady had at home. I think she was in some deep doo-doo.

I pulled the fire alarm when I was a senior in high school. Later in the day, someone else pulled the fire alarm again. It was a beautiful day and I didn't want to be stuck inside (I also wanted to opportunity to see my boyfriend). I got into trouble and had to spend the following day in "In School Suspension". When I walked in, I saw my brother... he was the puller of the second alarm. He told my parents that he wanted to prove that the kids from the "right side of the tracks" can be bad too.

Morning!

I hurt my back this morning...I was taking out the trash and must have twisted the wrong way. Owwwwwwwwwwwwwwwww!!!

Ouch. Take in easy today. 20 minutes of ice, 20 minutes of heat, 20 minutes of nothing... repeat.

Hey Tracy, we went and picked up our wine for the trip!!

Back me up on the Alicia.....


We don't care how it fits. Does it look good?

AMEN!!!

There are a couple ways of laminating.
One way is "Hot Laminating". You place your object between two pieces of special plastic and run it through a heat machine. The plastic melts and binds together creating a rigid water tight, usually glossy coating.

Another way is "Cold laminating". You place your object between to pieces of plastic that have an adhesive on one side and it is rolled through a set of rollers. (Think of a pasta rolling machine.) This method usually produces a more flexible matte finish on your project.

This is what I use...

It's made by 3M and it works great!

Speaking of laminating... on my list of daily things to do... today is "finish door magnets" day!

 

[shellyminnie]

A. - I don't know any of those Twilight people.

2. - Shelly, did you make all of our flatties?

I don't know. Did you want to make one?

Uh oh -- looks like Todd is headed for trouble again...

Todd stays in trouble!!

 

[spaddy]

I see your bung hole.....

Beavis and Butthead.

What i want and need is to laminate my logo's and all the stuff i made for putting on the stateroom door.
After it is laminated i put some magnet behind it so it sticks at the door.

Here i can only laminate in squares so then i have a lot of plastic around the logo's.

What would you suggest for what i want??

I cut around the edge of my magnets too. I was very impressed with how they look. I need to go buy some extra magnetic tape in case I need it.