DisneyIsTerrific
DIS Veteran
- Joined
- Jun 1, 2006
- Messages
- 6,523
Gypsy Wanderings is on your Gypsy. You do not need to have a cart in the cricut to cut with the Gypsy. Turn your cricut on with no cart installed and it'll know you are going to use the Gypsy. The cable to connect the Gypsy to the Cricut plugs into the back of the Cricut and then the other end goes in the small connection spot on the top of the Gypsy. After you have them connected, you do everything (tell it to cut, load the mat, unload the mat, etc.) through the Gypsy. You just need to make sure that you have the speed and pressure where you want it on the Cricut as you can't control that through the Gypsy. It's actually really easy.