Amy's (Non-Disney) Designs - Part III

[noahdove]

Thank you Amy!!!! Awesome job as usual will you please do me a pair the name Deb? Thank you

 

[MissDisney12]

Hopefully this is more like you had in mind...

I think I did a poor job explaining what I meant. So sorry if I am being a pain! When I refering to the sparkle, in my mind I was thinking of a glittery red filling inside the lettering of her name(I hope that makes sense). If that isn't possible the plain red is just fine without the sparkle surrounding the letters (it blocks to much of the adorable Toto). Also, would it be possible to leave the frame off the design completely? Sorry I am being so specific. I appreciate your patience with me! Thank you.

-Missy

 

[jbraught]

Thank you! I really appreciate it!

 

[M_I_C_K_E_Y]

That's wonderful thank you I tried to find graphics but I wasn't sure what would work :/

If you could do one with the name LOUISE
and also one with the name RICHARD with the rides:

- Hulk at Islands of Adventure
- Rip Ride Rockit at Universal Studios
- The Hogwarts Castle from Wizarding world
- Spider-Man at Island of Adventure

If this is too many rides to fit into the names could you leave out the Spider-Man image?

If this isn't possible I appreciate you trying anyway

Thank you

Here is what I worked on for you - I hope you like them...

 

[newlittleminnie]

Ohm ghosh Amy they are wonderful thank you so much

 

[M_I_C_K_E_Y]

Good Morning Amy,

I was wondering if you could do a couple other disigns for me!!! If I could please get: page 4 of this thread post #52 the Chevy with the Z-28 in it, can you do this one for me with the car in blue instead of green and it say RICK? Also wanting to see if I could get 2 names fills from you as well!

KeeLei- in Twilight
Keiani- in My little Pony

Also can you send me your link via my email? babygirlk2518 at hotmail.com
Thanks so much and hope you have a great day!

Link Sent! Here are your requested designs...

 

[M_I_C_K_E_Y]

Sorry I also wanted to see if you had a template for a Roller skating party candy bar wrapper to. Just needing the regular 1.5 size one! I would like it to say "Thanks for Skating with us!! Love, KeeLei and Keiani" on the front with a Roller skating image. Dont know if you can do that as well. Thanks again.

Here is your requested design...

 

[M_I_C_K_E_Y]

Amy, I LOVE the spring is sprung design!!!! Awesome..it really does look like spring...I think anyway..maybe it will look like that in a few weeks, if we are lucky Thank you again...

I am so glad you like it Marilyn! Have a great Easter!

 

[M_I_C_K_E_Y]

Thank you! I received them in record time. After reading through this thread, I think I am going to need to order some "Light paper" transfer paper? My daughter wants the back of her t-shirt to have words on it, and not to have a white background -- just words.

Is it possible to get this look with the dark transfers, or do I need to buy light transfer paper? Do you sell the light transfer paper? And, if not, is there a brand that you recommend?

Thank you!

I do not sell light iron on transfers nor can I recommend a brand as the dark transfers are the only ones I use, even on white shirts.

There are a few ways you can cut out text with a dark transfer. The easiest way is to put the text in an easy to cut out shape like a circle, square, etc..

Another way is to cut 'loosely' around the text. What I mean by that is to cut like cloud or bubble shape around the text, so in effect cutting around the text with a thin like border around it.

With either of the above options you could use a white background behind the text or try to match as closely as possible the tshirt color. This is what I normally do and have had pretty good results.

Lastly, especially if the letters are large and chunky, you could cut out each individual letter and place on the shirt. This can be very time consuming but the results are fantastic!

There is one other idea, but this requires the use of a Cricut machine. I got this idea from a fellow DIS'er and it works great. You can use the Cricut machine to cut out your letters and then iron on. If you want them white, simply put the blank sheet through the machine. If you would like a colored text, simply print the color on the sheet in a large block or two or whatever is needed and then cut in the printed areas. The hardest part about doing it this way is peeling off the backing paper. (because you cannot do the pre-peel before cutting)

Hopefully this helps!

 

[M_I_C_K_E_Y]

Is there anyway to change the date on the invite to May 28, 2013. I looked at the wrong day on my plans. Please? Thank you!

Here it is all fixed up...

 

[marquislaura]

Amy-
I am planning on taking my son to Legoland and was looking for a T-shirt design to print on a shirt for him.

His name is CHRISTOPHER.

(Would like something square not just a name fill)

Thanks,

Laura

 

[M_I_C_K_E_Y]

Hi Amy,

Looked through your pages again. and found some more requests.
Could I please have the following:

alex_minecraftfill_zps28e77511 - Evan, Aaron, and one for Ian
becky_shamuname2 - Evan, Aaron, Ian, July 2012
shamu_name2 - Evan, Aaron, and one with Ian
caillou_sign - IAN
ian_pokemon3 - EVAN
jack_thomasfill - for Evan, Aaron, Ian, FaFa and one with Nanny
taylor_barneyfill_zps5dc29a9d - names: Carol,
zumba_namecard - name Tai-Fei

Thanks ever so much
Lois (Nanny3)

Here are your requested designs... the only ones missing are the shamu name 2 designs that you indicated the date to be July 2012. I wanted to be sure that you wanted 2012 and not 2013. Let me know and I will finish up your requests.

 

[M_I_C_K_E_Y]

Mimi loved the designs! We are ordering our tie dye shirts this weekend. Thanks again Amy!

Dawn

I am glad she loved them!

 

[M_I_C_K_E_Y]

Thank you Amy!!!! Awesome job as usual will you please do me a pair the name Deb? Thank you

I made one of each, hopefully that is what you had in mind...

 

[M_I_C_K_E_Y]

I think I did a poor job explaining what I meant. So sorry if I am being a pain! When I refering to the sparkle, in my mind I was thinking of a glittery red filling inside the lettering of her name(I hope that makes sense). If that isn't possible the plain red is just fine without the sparkle surrounding the letters (it blocks to much of the adorable Toto). Also, would it be possible to leave the frame off the design completely? Sorry I am being so specific. I appreciate your patience with me! Thank you.

-Missy

Hopefully this is better...

 

[M_I_C_K_E_Y]

Thank you! I really appreciate it!

You are very welcome!

Ohm ghosh Amy they are wonderful thank you so much

You are welcome - I am glad you like the way they turned out!

 

[Nanny 3]

Hi Amy,

Yes, I did want the 2012 date. They went there last July, and I'm making them a keepsake book. I appreciate you asking. Thanks ever so much, the boys will love the minecraft namefills. I am sure I will be back again soon. You have so many wonderful things to choose from.

Once again thank you, thank you
Hugs
Lois (Nanny 3

 

[M_I_C_K_E_Y]

Amy-
I am planning on taking my son to Legoland and was looking for a T-shirt design to print on a shirt for him.

His name is CHRISTOPHER.

(Would like something square not just a name fill)

Thanks,

Laura

Here are a couple of choices...

 

[MyGirls88]

Amy, Thanks so much for all the designs!!! We just love them! You do such a great job. Thanks again!!
Amie

 

[M_I_C_K_E_Y]

Hi Amy,

Yes, I did want the 2012 date. They went there last July, and I'm making them a keepsake book. I appreciate you asking. Thanks ever so much, the boys will love the minecraft namefills. I am sure I will be back again soon. You have so many wonderful things to choose from.

Once again thank you, thank you
Hugs
Lois (Nanny 3

Just wanted to be sure...