change design please Epcot passport

[nicolesmom]

I have been searching the boards and found the cutiest Epcot passport.
I want to use it for a school project. Pat was the designer but the thread is no longer in use I believe. Could someone alter the cover design to read

It's a small world afterall or Passport to the World. And take off the Walt Disney World on the back cover.

This year I am going to do the following countries for our project.

United States
France
Italy
Mexico
China
Germany

Next year we are going to do

Norway
Japan
Morocco
United Kingdom
Canada

If anyone can break down these pages for me that would be awesome.

Thanks
nicolesmom


Here is the link
http://www.disboards.com/showthread.php?t=1509917&page=3


This was from page #14post #200

Hiya

I am going to post the link to the savefile, since Angela will be pretty busy the next few days or more!!

here are the instructions Angela send me:

Page 1 is one side -- Page 2 is the back side. Odd pages on one side of paper evens on the other.

I used 115 pound cardstock because that is what I had. It worked great but I would not go any heavier than that. Someone else used 65 pound. It just has to be thick enough so you can't see the printing on the other side.

I cut the inside pages slightly smaller and the outer pages a little bigger. If you don't then by the time the cover page is wrapped around all the others it is too small. I hope that makes sense.

I put clear contact paper on both sides of the outer page and cut it slightly larger that the cover. So I have a tiny amount of clear all the way around that page. I thought if I only put it on the outside of the cover the edge might eventually get sticky. A pen does write on the contact paper.

Put 3 staples in the center seam to finish.

that is it
Here is the link to the savefile, let me know if it works

http://savefile.com/projects/808547438
__________________