Tried to print auto pages using Snapfish...All of them were blurry. HELP!!!

[gymbomominNC]

What did I do wrong? I right-clicked and copied some of the DISigns from the PB albums that were shared. I pasted those into an album on my desktop then downloaded those pix to my Snapfish album. I noticed when I clicked edit and the design was enlarged it was blurry. I printed them in the 4x6" photo size in Matte. ALL of the cards, 50 or so, came back blurry. Luckily I had 50 free prints, but I didn't want to screw up again.

Can someone help me and tell me what I did wrong? Or what is a better way to go about printing the auto cards? TIA!

 

[jtanddolly]

More than most likely you saved the thumbnail image. If you got the images from photobucket you will need to click on the first image to open it up. Then when that opens up there will be gray buttons along the top of the picture. The one of the far left is "full size" click on that to open the image up 100% then copy or "save as" the image to your "my pictures".

If you got the image from a 4shared file...you will need to click on the image then download it to your pictures.

Hope that helps!

 

[gymbomominNC]

More than most likely you saved the thumbnail image. If you got the images from photobucket you will need to click on the first image to open it up. Then when that opens up there will be gray buttons along the top of the picture. The one of the far left is "full size" click on that to open the image up 100% then copy or "save as" the image to your "my pictures".

If you got the image from a 4shared file...you will need to click on the image then download it to your pictures.

Hope that helps!

Yep! That sounds like what I did. Thanks for your help.