Pin Framers

Luv2Roam

DIS Legend
Joined
Jun 3, 2000
Messages
15,479
I think it was Heather who linked to some wonderful pin framing she created.
On one, the background was fabric, with an onion translucent paper (?) covering the fabric to tone it down.
Was that paper? What kind, and what department did you find it?
I saw tracing paper at Michael's and almost bought that, thinking that may be what it was.

During our move, the movers broke the glass out of a framed piece of artwork. They paid for the replacement expense.
I had the artwork reframed/matted by Michael's. (And I think Heather could have done a better job. ;) )
I also had the old frame and matting returned to me. Now I have a great mat and wood frame to experiment with. :)
It is fairly large, but not huge.

Now -- another question for framers....
When we picked up the new framed artwork from Michael's, they did not string hanging wire on the back. Instead there are these two large metal D loops, that are placed one on each side, almost half way down. :confused:
We were told this makes the picture more stable for hanging. This is not a huge, heavy picture. I wouldn't want to carry it around all day ;) but it is not like it is HEAVY.
I have never seen this and we weren't too happy about that. It will make hanging this picture almost impossible to be perfectly straight. We have enough hard time just getting a regular picture like I want it on a wall. ;)
We bought our own wire to hang the picture.
Has anyone seen this method for hanging pictures?

I can see if the framed artwork was horizontally long, heavy (like LOTS of pins ;) under glass) or over sized. But not for what we have.
:confused: We have other artwork the same size, framed by Michael's and other professionals.
Sadly, there were other issues on this frame job and we won't use Michael's again. Nothing major. But for what we paid and it taking two weeks, it should have been perfect and we returned for touch ups -- including splintered framing. :( Heather -- we needed you! ;)

A plus side -- Michael's had shadow boxes 40% off. :hyper: I bought a few. :)
 
Oh Barb!
It is nice to feel needed!

Michaels, I'm sorry to say, although they are good
for a decent cheap frame here and there...
they are notorious for having (no offense to anyone)
pimply faced teenagers doing your framing for you!
They are HORRIBLE! I'd never recommend their
custom framing service - ever! It is like going to
McDonalds and expecting 5 star service... what you
get is, like I said, greasy pimply faced kids having no
respect for you and spitting in your burgers instead!
Sorry for the technicolor visual there!

Your experience is just the tip of the iceberg!
I've had $50.00 mattes cut wrong, posters framed
where they have not centered the image AND the
title of the print and it looks "off"... oh goodness!
For YEARS they were the only affordable thing here
but I wouldn't trust them with anything!

On the D clips that are holding your picture frame
up, see if you can adjust them with a screwdriver...
then re-configure the wire to be shorter... I hate
those D thingies... the ones on my biggest frame are
adjustable with a quick unscrew, reposition and
retighten! Hopefully this will help you out! It doesn't
need to be that way to be "stable." I usually figure
about 2" down is plenty... or approx 1/4 of the width
down is a good place (maximum!)

Good advice for the future... in pins and anything else...
Buy your own $99.00 matte cutter and an $11.00
sheet of matte board (both from Aaron Brothers
if you have them close) and PRACTICE! Also a bottle
of spray mount archival adhesive helps... and so does
a spare room with a BIG table! Look for the 40-50%
off coupons from Aaron Bros!

It is SO nice to be thought of as the framing expert!
Lets me know that I have made an impact in someones
mind and life! If you were closer Barb... I'd help you
frame stuff (pins or otherwise) anytime!:wave2:

p.s. the "onion skin" paper: I work for the printing
dept at U of A, and have been in printing for 16
years, so my paper knowledge is extensive...
the paper I use to "conceal" backgrounds that are
over powering is called UV Ultra... you as a consumer
could find it in 2 places... if you have a printer close
to you, you can order a ream or so of it from them,
but beware, you'll pay a premium and retail markup!
However, if you have a paper outlet near you, and
not an outlet MALL, a dealer... look for a place called
Expedx, Unisource, or Kelly Paper... look in
the yellow pages under printing supplies and call
around to see if they have a store in your area.
Most likely you'll have Kelly... ask if they have UV
Ultra or a similar paper that you can purchase either
by the parent size sheet, cut size sheet or ream...
ream will get you 500 sheets but if you can find
a Kelly Paper you can usually get individual cut size
sheets (8 1/2 x 11) for under 25cents each... ALSO,
you can always try JoAnn's Fabrics and Crafts...
their scrap booking areas are farily extensive and
they have some vellum papers that are slightly
see thru in the 12 inch pieces...

If you ever have ??'s feel free to email me!
That goes for anyone - not just Barb! :)
 














Save Up to 30% on Rooms at Walt Disney World!

Save up to 30% on rooms at select Disney Resorts Collection hotels when you stay 5 consecutive nights or longer in late summer and early fall. Plus, enjoy other savings for shorter stays.This offer is valid for stays most nights from August 1 to October 11, 2025.
CLICK HERE













DIS Facebook DIS youtube DIS Instagram DIS Pinterest

Back
Top