jann1033
<font color=darkcoral>Right now I'm an inch of nat
- Joined
- Aug 16, 2003
- Messages
- 11,553
i have a cheap phoenix macro ( 100mm) that last i knew was working...i've been meaning to try it with my tamron 1.4 converter and did that sunday...long and short the auto focus wouldn't work but using manual was ok...so it worked, i just had to manual focus...then monday i wanted to try it with the 1:1 filter ( it's 1:2 without) and the converter...it wouldn't work at all, not even when i tried to manual focus it. i know the 1:1 is very picky about how far you are from the object but i was careful to be a ft away(where it usually works ) then i tried it without the converter and it wouldn't work that way either...it is just a total blur, even when using manual focus, like it was out of focus which of course it was but it never went in focus....so what in the lens would make it not focus in manual? it has been making a loud noise when focusing but since i wasn't using auto focus it didn't make that noise..so would it not be able to focus even in manual if the contact points were dirty or something?...sunday the exposure etc was fine, everything looked good as long as i manually focused. monday the lens wouldn't work at all...any ideas?