No too more handicapped gondolas if it slows down the regulars ones. If they can add more too the tracks and not have it slow down fine. But buses already are dragged down due to all the evcs.
Hi, CrankyDad.
There are two Disney Skyliner Station Gondola loading zones in the Caribbean Disney Skyliner Station for each of the three destinations to Pop Century/Art of Animation Resorts and to Disney Hollywood Studios and to EPCOT. One for walkers and one mobility guests. Each zone is on a different track and not the same track. The time it takes a guest to load their wheelchair or mobility
scooter has no effect on slowing down the walker's gondola. Once the handicap gondola is loaded and the doors closed, the Disney cast member follows their protocols on when to merge the handicap gondola to the Disney Skyliner Station cable. The Disney Skyliner Station cable is different from the continuously running cable outside the Disney Skyliner Station. It may only take a couple of seconds for the handicap gondola to be added to the Disney Skyliner Station walker's cable. Then both the walker's gondola and the handicap gondola will leave the Caribbean Disney Skyliner Station by switching to the main cable.
There are two Disney Skyliner Station Gondola loading zones in the Disney Hollywood Studio's Disney Skyliner Station. One for walkers and one mobility guests. Each zone is on a different track and not the same track. The time it takes a guest to load their wheelchair or mobility scooter has no effect on slowing down the walker's gondola. Once the handicap gondola is loaded and the doors closed, the Disney cast member follows their protocols on when to merge the handicap gondola to the Disney Skyliner Station cable. The Disney Skyliner Station cable is different from the continuously running cable outside the Disney Skyliner Station. It may only take a couple of seconds for the handicap gondola to be added to the Disney Skyliner Station walker's cable. Then both the walker's gondola and the handicap gondola will leave the Disney Hollywood Studio's Disney Skyliner Station by switching to the main cable.
There are two Disney Skyliner Station Gondola loading zones in the Disney EPCOT's Disney Skyliner Station. One for walkers and one mobility guests. Each zone is on a different track and not the same track. The time it takes a guest to load their wheelchair or mobility scooter has no effect on slowing down the walker's gondola. Once the handicap gondola is loaded and the doors closed, the Disney cast member follows their protocols on when to merge the handicap gondola to the Disney Skyliner Station cable. The Disney Skyliner Station cable is different from the continuously running cable outside the Disney Skyliner Station. It may only take a couple of seconds for the handicap gondola to be added to the Disney Skyliner Station walker's cable. Then both the walker's gondola and the handicap gondola will leave the Disney EPCOT's Disney Skyliner Station by switching to the main cable.
There are two Disney Skyliner Station Gondola loading zones in the Disney Pop Century/Art of Animation Disney Skyliner Station. One for walkers and one mobility guests. Each zone is on a different track and not the same track. The time it takes a guest to load their wheelchair or mobility scooter has no effect on slowing down the walker's gondola. Once the handicap gondola is loaded and the doors closed, the Disney cast member follows their protocols on when to merge the handicap gondola to the Disney Skyliner Station cable. The Disney Skyliner Station cable is different from the continuously running cable outside the Disney Skyliner Station. It may only take a couple of seconds for the handicap gondola to be added to the Disney Skyliner Station walker's cable. Then both the walker's gondola and the handicap gondola will leave the Disney Pop Century/Art of Animation Disney Skyliner Station by switching to the main cable.
The only Disney Skyliner Station that does not have two loading zones is the Disney Skyliner Riviera Station. I presume because of the Disney Skyliner Riviera Station has a built-in 90-degree turn built into it. I presume the Disney Skyliner Riviera Station cable must either stop for wheelchairs and mobility scooters go very slowly. This should not affect the main cable outside of the station.
BlogMickey.com
@Blog_Mickey
When the
#DisneySkyliner stops running or slows down, it's typically because
non-
ECV/handicap guests don't load in time. If that happens, a Cast Member slows/stops the system to ensure guest safety. Red tape on the ground marks the "load by this point" cut off
https://pbs.twimg.com/media/EFpxksJXoAAAYc_?format=jpg&name=4096x4096
This is not the handicap loading zone. This the regular walker's line.
I presume if the regular walker's line takes too long to get on the gondola for whatever reason, I guess they may also stop the main cable line outside the Disney Skyliner Stations. I don't know, but maybe the Disney Skyliner main cable has to have a minimum number of gondolas for operation. I have no idea.
I do know that slowness of loading the Disney Skyliner Station handicap loading zone is on a separate cable than the Disney Skyliner Station walker's cable zone and the main cable outside the Disney Skyliner Station if that makes sense.
I read that it will take a while for all of the Disney Skyliner Station cast members to learn all of the in and outs of how to troubleshoot issues like slowing down the gondola instead of hitting a stop button. Guests not ready to board because they are not ready or confused or asking questions or folding larger strollers or for whatever reason. There will always be a learning curve for both Disney Skyliner Station cast member operators and guests.
Hopefully, someone will come by and let us know what are the reasons the main cable stops besides operator errors. Because I really don't know.
.