Does anyone know how to override the a/c at BC? All the instructions/videos I’ve found have buttons different then the room thermostat. Ours does not have an “on/off” button
View attachment 575544
Your best bet is to go to the front desk and request that Maintenance come and override it for you. They usually come fairly quickly when you ask for them at the front desk. If you call from your room you will reach the dreaded off site call center and be put at the bottom of a list that takes longer to be communicated to the actual resort.
In the days of yore one used to be able to override the thermostat by pressing and holding an combination of buttons. If you can see who manufactured the thermostat you might be able to search on the internet for the button dance you must do to override the default settings.
The following information is from 2008 so it may not be applicable.
May the (thermostat) Force Be With You!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Press the power button and the down arrow button simultaneously. The letters "bp" should appear in the display indicating you are in "bypass" mode. Then you can use the up/down buttons to set the temperature. You may have to do this every 24 hours or every few days.
The sensor by-pass for our kind of thermostat was simple--I just pressed the "off" button and both the temperature "up/down" buttons all at the same time. "BP' appears in the thermostat, and then it operates as most other thermostats in most other hotels in the US
And yet another:
The thermostat has two buttons on the left (ON/OFF and AUTO/FAN) and two buttons on the right (UP and DOWN)
1) Press the ON/OFF and AUTO/FAN buttons together. The digital display will change to 'CA'.
2) Press the ON/OFF and DOWN button together. The digital display will change to 'OR" (or something similar).
You have just deactivated the motion sensor. This will last for three days at which point you will have to repeat the process.
TO CHANGE AC THERMOSTAT SETTINGS THE THERMOSTAT HAS TO BE PUT INTO "SERVICE MODE" IT IS SIMPLE TO DO BY PRESSING THE FOLLOWING KEYS ON THE FRONT OF THE THERMOSTAT.
EXECUTE THE FOLLOWING SEQUENCE:
1. PRESS (AND KEEP PRESSED) THE F/C KEY
2. PRESS (AND RELEASE) THE OFF/AUTO KEY
3. PRESS (AND RELEASE) THE DISPLAY KEY.
4. RELEASE THE F/C KEY.
UPON SUCCESSFULLY COMPLETING THIS SEQUENCE, THE LCD WILL DISPLAY PAR (PARAMETER) AND THE PARAMETER NUMBER.
1. PRESS THE UP ARROW KEY AND SCROLL UNTIL # 6 APPEARS. (NEW MODELS # 24)
2. PRESS THE OFF/AUTO KEY
3. THE CURRENT LOW TEMPERATURE IS DISPLAYED.
4. PRESS THE DOWN ARROW KEY AND SCROLL UNTIL THE DESIRED ROOM
TEMPERATURE APPEARS
5. PRESS THE F/C KEY