SSR Theromostat
On the thermostat, push the power button and the down arrow (button that adjusts the temp) at the exact same time. If you do this correctly, you will see the letters "bp" where the temp normally shows. You are now bypassing the sensors in the room. You can then set the temp to whatever you want and it keeps the room that cold whether you are in it or not. The maintenance man said that you might have to do this once a day as the thermostat tends to go back to sensor mode after 24 hours. The CM that did this for us said it was not a problem doing this as they do it for people all the time.
or
1) Press the two left buttons together (on/off - auto/fan)
2) Press the top left botton and the bottom right button (on/off - down arrow)
You will see 6p on the readout. You are now set for about 4 days. Repeat the procedure then.